V Cutter hits Hollywood...

It is great to eventually start updating the site and give some low down on what has been happening!!

From our original ...offering to the Xanita Board Gods we have now got something that we have been using every day for a month with no machanical failures and 1 or 2 design issues that were easly remedied.

I will attempt to update you on a weekly basis and I am also putting together a website that will have all the various things we have put together using the current machine.

We are bulding an office and you may be interested to see the final product so you can go to the following adress:

I also have a clip about how the machine runs and how you can get a double fold in your X Board at the following link:

All this for around R50 000 (GBP 3250 or $5600 or Euro4075)

We trust you will find this interesting.

Should you want to get a price on one of these, please advise us of your local power supply ie 110 Volts, 220, 230v etc and we can advise accordingly. The machine is supplied with out the extractor. The shipping is the same cost as going to your local woodwork machine supplier and picking up a Dual Pipe machine and therefore it is 50% more cost effective for you to get it locally.
Good Luck!
the V TEAM

V Cutter- not just cheap but efficient as well...

As promissed, the launch of the V Cutter has taken place this afternoon.

All features were demonstrated with the capabilities of the machine pushed beyond our expectations. Straight after the demonstration, delegates requested us to try variants of what we had shown. The machine was succesfully used to manufacture a Point of Purchase display for the wine industry that can also be addapted for the FMCG market. Bulk heads were cut primarily for the dry wall industry and the customising of kitchens as well as a wonderfull opportunity for advertising on strategic places in malls and shops around the world.

A specification sheet as well as a capabilities profile for pottential clients to look at, will be posted before the end of the week but all in all a very succesful launch gauging on the applause when the spectators realised what had just been done!

New cutter to open the XBoard market

It's official... the new XBC V -Cutter is being launched in Cape Town -4 February 2008.

Having spent 6 months since the first prototype was succesfull. The final product has a Swiss design base (which has the European CE mark) and a South African precision engineering conversion to ensure consistancy in cut and product.

Fitted with a double head extraction system,

dust is kept to a minimum with induction motors

to ensure that all moving parts make the least

possible noise.

For further information watch this space from 4pm on 4th Feruary 2008 and don't forget to right click on the page and press refresh or reload in order to ensure that you have the most up to date info as the launch will take place simultaneously at the Export launch as well as on this blog.

We look forward to hearing from you soon.